Our Double Glass Partition Line builds upon the simplistic premise of the a single glass partition wall with even more opportunity for customization. Enhancing acoustical value and allowing for design touches like lighting between the two panes are just two ways the double glass walls can be uniquely yours.

The main window-door profile size is from 2.5 for a base with a 3 cm height without spacer. The perimeter profile allows room to the glass panes to move inside it with a maximum tolerance of +/- 15 mm. These tolerances are guaranteed by the system also for wall abutments. Special soundproofing gaskets are provided for; they are located
in the areas where the perimeter profile and the connecting
surfaces touch.

Glass panelling:
Thickness of glass panes in mono-glass wall

  • 10 mm tempered transparent / etched uniform one side
  • 12 mm tempered transparent / etched uniform one side
  • 5 . 5 . 1 stratified transparent / etched uniform one side
  • 6 . 6 . 2 stratified transparent / etched uniform one side

Thickness of glass panes in double-glass wall

  • 2 X 10 mm tempered transparent / etched uniform one side
  • 2 X 12 mm tempered transparent / etched uniform one side
  • 2 X 5 . 5 . 1 stratified transparent / etched uniform one side
  • 2 X 6 . 6 . 2 stratified transparent / etched uniform one side

Other glass panes which can be installed on the product:

  • The glass modules can be made up of types which range from the minimum of a 10 mm glass pane to a maximum of a 6.8.4 glass pane on the basis of the project requirements.
  • The adjacent glass panes are joined with a special transparent tape so if the elements must be subsequently separated they will not undergo damage. The joint can also be carried out with a transparent polycarbonate profile.